Step-by-Step Installation Guide for Wall-Mounted Toilet Roll Holders

A well-placed toilet roll holder is one of those small details that makes a bathroom feel considered and complete. Whether you're fitting one of our oak or walnut wall-mounted holders or a sleek black finish design, this guide walks you through a clean, professional installation. Materials and Tools Needed: Wall toilet roll holder (includes holder, screws, and wall plugs) Offset Screwdriver Drill Level Pencil Measuring tape Hammer (for wall plug) Step-by-Step Guide: 1. Choose the Location: Decide on the ideal location for your toilet roll holder. It should be within easy reach from the toilet but positioned away from water splashes. 2. Measure and Mark: Use a measuring tape to find the desired height. Standard height is typically around 26 inches (66 cm) above the floor. Mark the spot clearly with a pencil. 3. Check for Studs: Use a stud finder to locate wall studs. Mounting on a stud provides the most stability. If the desired location is not on a stud, use wall anchors instead. 4. Levelling: Place a level horizontally at the marked spot to ensure the holder will sit straight. Adjust position as needed before drilling. 5. Install Wall Anchors (if necessary): If not mounting on a stud, drill holes and fit wall anchors following the manufacturer's instructions. 6. Install the Holder: Align the holder's fixing holes with your marked spots. Secure with screws, tightening until the holder is firmly flush against the wall. 7. Double Check Levelling: Once fixed, recheck with your level and make any final adjustments. 8. Test the Holder: Give the holder a firm tug to confirm it is securely mounted before loading with a roll. 9. Final Clean-up: Wipe down the holder and surrounding wall to remove any pencil marks or dust. Your wall-mounted toilet roll holder is now installed. For specific fitting variations, always refer to the instructions included with your NOIR.DESIGN product.

Step-by-Step Installation Guide for Wall-Mounted Toilet Roll Holders

Leave a comment

Read more